Pressure sprayer with rechargeable battery (20 pages)
Summary of Contents for Solo 453
Page 1
Translation of the original Pressure Sprayer instructions Instruction manual Attention! Read this instruction manual carefully before first operation and strictly observe the safety regulations! 9 453 10102 05/2014...
Page 2
ENGLISH 1 Spray tube 2 Pressure relief valve 3 Pump handle 4 Spray nozzle 5 Shut-off valve 6 Spraying agent tank 7 Transport handle 8 Handle screwing 9 Month and year of production (back side of the container) 10 Holding clamp Fig.
Page 4
Wear the prescribed protective clothing. Your authorised SOLO dealer will be glad to assist you with any questions. Wear protective gloves. Packaging and disposal...
Page 5
Table of contents / 1 Safety regulations Table of contents 1 Safety regulations ............................. 3 1.1 Correct use / areas of application 3 1.2 General safety instructions 4 1.3 Safe handling of spraying agents 4 1.4 Work clothing / personal protection equipment (PPE) 5 ...
Page 6
Always use genuine care when using the device. SOLO replacement parts, as these are the only You can put your life at risk by failing to follow the parts that have been manufactured with the safety instructions.
1 Safety regulations Never eat or drink when handling spraying Wear protective shoes with good grip, preferably agents. safety shoes. Stop working immediately if you start to feel Immediately change any clothing that becomes unwell while working, or if you become unusually soaked with the spraying agent.
(1) and the nozzle attachment (4). Pull out the transport handle on both sides All repairs must only be performed using SOLO evenly until the desired height is set. genuine replacement parts. Re-tighten the handle screwing by turning it to ...
Ensure that the mixture is thoroughly mixed Recommendation: Use the special SOLO cleaner before pouring it into the spraying agent tank. for plant protection sprayers (dosing bottle of ...
4 Using the pressure sprayer / 5 Maintenance, cleaning and storage Pumping and spraying: Replacing the spray nozzle and the filter element: See section 5.3 To pump, loosen the pump handle (3) by turning out of the stop position. Pump the unit until the 4.2 Transport of the pressure sprayer operating pressure is reached in the spraying agent tank (Fig.
Please read and observe the cleaning instructions nozzle and/or the filter element by genuine SOLO supplied with the spraying agent. replacement parts.
Before pulling on the pressure relief valve (2), the device must always be in an upright position. Attention: Keep the device away from your face! If you have any questions please refer to your authorised SOLO dealer. 6 Standard delivery ...
Page 13
7 Specification and special accessories / 8 Wearing parts / 9 Warranty 7 Specification and special accessories Model ("Typ" Spraying agent tank: Tank volume ("Total Vol." 14.0 l [3.7 gal] Max. fill volume ("max. Vol." 11.0 l [2.9 gal] Residual volume not properly discharged by the device <...
Need help?
Do you have a question about the 453 and is the answer not in the manual?
Questions and answers