Page 1
456 / 457 / 458 Originalbetriebsanleitung Druckspritze Original instructions Pressure Sprayer Notice originale Pulvérisateur à pression Manual original Pulverizador a presión Istruzioni originali Spruzzatore a pressione Oorspronkelijke Drukspuit gebruiksaanwijzing Originální návod k Tlakové post ikovaþe obsluze Tlaþna škropilnica Originalna navodila za uporabo Trykksprøyter...
Page 4
Germany declares that the Pressure Sprayer unit repairing or replacement of the product under type 456, 457, 458 from production date 05/2018 warranty. All costs incurred for repair or replace, onwards - corresponds to the relevant provisions of...
Page 5
6 Safety provisions Replace damaged parts without delay. Only use SOLO genuine spare parts. 6.1 Intended use / applications Only use factory approved accessories and attachments for this sprayer. Use the sprayer only for the application of liquid Empty and clean the sprayer according to the herbicides, pesticides and weed killers as well information in chap.
Page 6
6.5 Work clothing /personal protection 7 Work preparation equipment (PPE) Fig. 1: Suitable and approved protective clothing (shown as example, fittings depending on model) that protects all body parts from contact with Hint: the spray solution must be worn. The model 458 has a base. Wear firm shoes with good gripping soles.
Page 7
8 Preparing the spray liquid and filling the 9 Use of the pressure sprayer spray tank 9.1 Spraying Prepare the spray liquid according to the x Do not use the sprayer in wind or rain. instructions of the chemical manufacturer. x Check the direction of the air movement before Always prepare the spray liquid outdoors, never in starting work and spray with the air movement,...
Page 8
10 Maintenance, cleaning and storage 10.4 Replace the spray nozzle and/or filter x Flush the nozzle assembly with clean water. 10.1 Maintenance plan x Unscrew the nozzle assembly. Before starting work: x Clean the O-rings, filter insert and spray nozzle Check the entire sprayer is operationally safe by: with clean water and soft brush.
Page 9
10.6 Empty the spray tank and clean all the Clean the spraying nozzle, filter and filling screen: Fig. 13: parts in the spray delivery system to the x Flush the nozzle assembly with clean water. nozzle x Unscrew the nozzle assembly. Before opening the spraying agent tank and before x Clean the O-rings, filter insert and spray nozzle disassembling the nozzle attachment, depressurise...
Need help?
Do you have a question about the 456 and is the answer not in the manual?
Questions and answers