Page 4
Attention: keep the sprayer Fill the spray liquid to the fill mark maximum. away from your face! Model 456: 5,0 liters Do not expose the pressure sprayer to high Model 457: 7,0 liters temperatures.
Page 5
To pump, loosen the pump handle by turning out Always empty the sprayer completely and store it of the stop position. Pump the unit until the in a location that is dry, frost-free, and protected operating pressure is reached in the container. from direct sunlight.
Page 6
5. Technical data Maximum fill volume 5.0 l (Model 456) 7.0 l (Model 457) Permissable operating pressure 3 bar Permissable operating temperature 0ºC bis 40ºC 6. Specification of nozzle tips Specification Order- Delivery Pressure Angle Applications l/min Hollow Cone Tip 1 mm 49 00 209 50°...
Page 7
• Damages caused by overheating due to dirt build up on the ventilator casing. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage.
Need help?
Do you have a question about the 456 and is the answer not in the manual?
Questions and answers