Solo Master 452-01 Instruction Manual

Solo Master 452-01 Instruction Manual

Motorized mistblower

Advertisement

Quick Links

- ENGLISH -
Instruction manual
Original instructions
Caution! Prior to operating the unit, please
read the owner's manual carefully, and most
importantly, observe all safety rules.
Observe the maintenance guidelines closely to
ensure the long service life of your equipment.
Your dealer will be glad to assist you with any
questions.
This machine produces an electromagnetic
field during operation. This field may under some
circumstances interfere with active or passive
medical implants. Persons with medical implants
have to consult their physician and the medical
implant manufacturer before operating this
machine.
Information about ingredients
(VO (EC) No.1907/2006 „REACh")
can be found on our homepage under:
https://de.solo.global/de/content/12-service
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then
they must be disposed of properly in accordance
with applicable local regulations. Cardboard
packaging materials are raw materials which can
be recycled or reused.
At the end of the equipment's service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area
Type plate
a: Type designation
b: Serial number
c: Build year
Motorized mistblower MASTER 452
Symbols
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Always handle this power tool with
particular care
Wear the prescribed protective clothing.
Wear ear defenders before starting the
engine
Wear face protection
(e.g., safety goggles).
Wear protective gloves when handling and
working with the equipment
A breathing mask should be worn when
using poisonous chemicals
Petrol is highly flammable
Keep open flames away from the power
tool and the fuel can.
Never smoke near the power tool or where
the equipment is refuelled!
No-one else may remain in the vicinity of
the motor appliance whilst it is operating.
Switch off engine
Choke open
Operation and warm start
Choke partially open
Warm-up
Choke closed,
Cold start position
In the best interest of continued technological
progress we reserve the right to change the design
and configuration of any product without prior
notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual
.
ENGLISH 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Master 452-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Solo Master 452-01

  • Page 1 A breathing mask should be worn when (VO (EC) No.1907/2006 „REACh“) using poisonous chemicals can be found on our homepage under: https://de.solo.global/de/content/12-service Petrol is highly flammable Packaging and disposal Keep open flames away from the power tool and the fuel can.
  • Page 2 Please note as well that 10. Starting / Stopping the engine ......  9   guarantee performances from SOLO are not possible if parts other than SOLO original parts are 11. Operation hints ..........  1 0  used. 11.1  Misting Hints 10 ...
  • Page 3: Safety Regulations

    • Unauthorized modification or changes made to the device. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage. • Using unsuitable fuel or fuel that has been stored too long.
  • Page 4: General Safety Instructions

    Safety regulations 4.2 General safety instructions Some parts on the machine have been removed for transport purposes. Prior to first use, the mistblower has to be completely assembled. This mistblower may only be started and used when completely assembled. Read the operating instructions carefully before placing in service and keep them in a safe place. The operating instructions must be kept available at all times wherever the device is used or stored.
  • Page 5: Safe Handling Of Spraying Agents

    Safety regulations 4.5 Irregularities, incidents, accidents  In case of irregularities, leaks, visible damage or reduced efficiency, do not commence work, but leave the unit from a dealer check.  When irregularity, leaks or malfunctions occur during operation, turn off the stop switch immediately and put the machine on the ground immediately.
  • Page 6: Important Components

    Important Components 5. Important Components Fig. 1 Tank lid / Filler basket with filter Primer Formula tank Shoulder strap – quickcoupling Formula outlet Liquid tap Spark plug Spray tube Carburetor adjustment screws Spray nozzle Muffler Dosage sleeve Starter handle Throttle lever Air filter cover Wide-range nozzle Fuel tank cap...
  • Page 7: Adjustment Of Shoulder Straps

    Assembly of misting equipment ; Adjustment of shoulder straps 6. Assembly of misting equipment Fig. 4 Completely assemble the mistblower before its first use. Fig. 2 Check hose connection to on/off tap and retighten cap nut if required. Shut on/off tap, fill some plain water in formula tank and check for any leakage.
  • Page 8: Fuel Information

    Fill in card fully to avoid spilling of fuel or oil. Recommendation:  Replace and secure fuel tank lid. Use the "SOLO Profi 2-stroke engine oil" at a mixing ratio of oil:petrol of 1:50 (2 %). 9. Filling Store the fuel mix no longer than 3 weeks.
  • Page 9 The strainer has a mesh size of 0.55 mm. Only use original SOLO strainers, part no.: 13279 with standard mesh size. Avoid any direct contact of the filling hose and the contents of the spraying agent tank.
  • Page 10: Operation Hints

    Operation hints 11. Operation hints Note: The liquid pump attachment comprises a special metering body, which should be installed when using a liquid pump. Please note: When using a liquid pump, 11.1 Misting Hints ensure that the tank contains sufficient Fig.
  • Page 11 Operation hints In narrow spaces and for aftercare, we If required, tip the equipment slightly to drain the recommend placing the wide-angle grille (7a) onto tank completely. the wide-range nozzle. This ensures that the spray Ensure that the spray medium does not run over velocity is reduced and the spray is applied more the equipment (especially the engine), but drains widespread, to prevent damage to leaves.
  • Page 12: Spark Plug

    Maintenance and care 12. Maintenance and care Cleaning of air filter Before opening the air filter housing, close the choke to prevent dirt entering the carburettor. Any cleaning, maintenance or repair jobs should only be performed when the engine is stopped and Fig.
  • Page 13: Carburettor Adjustment

    Maintenance and care 12.3 Carburettor adjustment 12.4 Storage Hints / Transport Hints If the unit is to be laid up or kept idle for any length The carburettor has been adjusted optimally at the of time, proceed as follows: factory. Subject to the operational altitude a) Rinse and clean thoroughly.
  • Page 14 Maintenance Plan 13. Maintenance Plan The following information is based on standard operating conditions. For special conditions, such as prolonged daily use, the recommended maintenance intervals should be reduced accordingly. Implement all maintenance jobs regularly. If required, authorise a specialist service centre to maintain the machine for you.
  • Page 15: Technical Specifications

    46 / 40 Max Engine power (ISO 8893) kW at rpm 2.1 / 5750 Fuel tank capacity Fuel mix ratio: with SOLO 2T Oil 1:50 (2%) Carburettor All-position diaphragm carburettor with primer and integrated fuel pump Air filter cartridge Foam filter...

This manual is also suitable for:

Master 452Master 452-02Master 452s

Table of Contents