Cisco Catalyst 2960-X Command Reference Manual page 50

lacp port-priority
Examples
This example shows how to configure the LACP port priority on a port:
Switch# interface gigabitethernet2/0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged EXEC
command.
Related Commands
Command
channel-group
lacp system-priority
show lacp
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
44
Description
Assigns an Ethernet port to an EtherChannel group, or enables an
EtherChannel mode, or both.
Configures the LACP system priority.
Displays LACP channel-group information.
Layer 2 Commands
OL-29043 -01