Cisco Catalyst 2960-X Command Reference Manual page 99

Layer 2 Commands
Examples
This example shows how to enter MST-configuration mode, map VLANs 10 to 20 to MST instance 1, name
the region region1, set the configuration revision to 1 and display the pending configuration:
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# instance 1 vlan 10-20
Switch(config-mst)# name region1
Switch(config-mst)# revision 1
Switch(config-mst)# show pending
Pending MST configuration
Name
Revision
Instance
--------
0
1
-----------------------------
This example shows how to reset the MST configuration to the default settings:
Switch(config)# no spanning-tree mst configuration
Related Commands
Command
show spanning-tree
OL-29043 -01
[region1]
1
Vlans Mapped
------------------
1-9,21-4094
10-20
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
spanning-tree mst configuration
Description
Displays spanning-tree information.
93