Cisco Catalyst 2960-X Command Reference Manual page 75

Layer 2 Commands
vlan {info | line-state}
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
The stack-view keyword is not supported on switches running the LAN Lite image.
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
OL-29043 -01
Modification
This command was introduced.
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
show platform pm
Displays platform VLAN
information. The keywords have
these meanings:
• info—Displays information
for active VLANs.
• line-state—Displays
line-state information.
69