Table of Contents
Advertisement
Step Four
Two persons required.
Please position the assembled wardrobe components vertically on the base of the wardrobe as
shown in the picture. Please angle the front frame as per diagram and locate the dowels into
the bottom holes. Front (09) must attach to wardrobe frame according to the arrows direction
shown. Tighten with a screwdriver.
Step Five
Two persons required.
Please attach top (01) as shown. Tighten the top (01) with a screwdriver.
To remove the supporting door system please uscrew the middle screw as shown below. This
is a two man job - the other person should secure the other side.
Advertisement
Table of Contents
