Summary of Contents for John Lewis Napoli 80310601
Page 1
Please check the pack contents before attempting to assemble this product.A full checklist of compo- nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fittings checklist Metal dowel x 22 Long cam lock x 2 Middle cam lock x 14 30mm Short cam lock x 6 Wooden dowel x 26 25mm Nail x 30 Nail guide x 1 11mm Euroscrew x 8 Support foot x 4 30mm Screw x 8 30mm Screw x 16 410mm runners x1...
Page 4
Step by step assembly instructions Step One ttach 8x metal dowels ( ) into the pre-drilled holes on top panel (1) and bottom panel (17) as shown. Use a screwdriver to turn fitting ( ) clockwise to fix. Step Two ttach 6x wooden dowels (E) into the pre-drilled holes on side panel (2) as shown.
Page 5
Step by step assembly instructions Step Three ttach 4x wooden dowels (E) into the pre-drilled holes on rails (4) as shown. Place 4x cam lock (C) into the holes on side panels (4) as shown, arrow pointing towards the bolt. Step Four ttach 4x wooden dowels (E) into the pre-drilled holes on rails (3) (5) as shown.
Page 6
Step by step assembly instructions Step Five ttach 2x metal dowels ( ) into the pre-drilled holes on one the two rail (18) as shown. ttach 2x metal dowels ( ) into the pre-drilled holes on one the two rail (7) as shown. 11,5 mm Bottom 18 mm...
Page 7
Step by step assembly instructions Step Six Fix rails (18) onto side panel (2) using 4x screw (M) Pay attention to fix in the front part of side panel (2) the rail with the metal dowels fixed as shown. Pay attention to the right position of rail (18) as shown. Fix rails (7) onto side panel (2) using 4x screw (M) Pay attention to fix in the front part of side panel (2) the rail with the metal dowels fixed as shown.
Page 8
Step by step assembly instructions Step Seven ttach rails (3) (4) (5) onto side panels (2) as shown. Ensure metal dowels ( ) and wooden dowels (E) are aligned correctly with the holes of matching parts before attaching. Secure rails (3) (4) (5) to side panels (2) using a screwdriver to turn fitting (B) C) clockwise to fix. Step Eight ttach top panel (1) onto side panels (2) as shown.
Page 9
Step by step assembly instructions Step Nine ttach bottom panel (17) onto side panels (2) as shown. Ensure metal dowels ( ) and wooden dowels (E) are aligned correctly with the holes of matching parts before attaching. Secure bottom panel (17) onto side panels (2) using a screwdriver to turn fitting (C) clockwise to fix. Step Ten Position back panel (6) as shown ttach 4x support foot (I) to bottom (17) with 8x screw(M).
Page 10
Step by step assembly instructions Step Eleven ttach back panel (6) onto back side of the unit using 30x nails (F), with the help of the nail guide (G). Important: The cabinet MUST be ‘square’ when the back is attached. Step Twelve Fix runner parts (Z1) (Z2) (X1) (X2) through holes shown in the detail view using euroscrews (H).
Page 11
Step by step assembly instructions Step Thirteen ttach 2x wooden dowels (E) into the pre-drilled holes on drawer sides (11) (12) as shown, Place the cam lock (D) into the holes on drawer sides (11) (12) as shown, arrow pointing towards the bolt, ttach 2x metal dowels ( ) into the pre-drilled holes on drawer front (8).
Page 12
Step by step assembly instructions Step Fifteen Slide drawer bottom panel (9) into the drawer box grooves, pay attention to correct position. Position drawer front (8) onto drawer box, turn locking nuts (D) clockwise to lock. Step Sixteen ttach 4x wooden dowels (E) into the pre-drilled holes on drawer sides (14) (15) as shown. Place the cam lock (D) into the holes on drawer sides (14) (15) as shown arrow pointing towards the bolt, ttach 4x metal dowels ( ) into the pre-drilled holes on drawer front (13).
Page 13
Step by step assembly instructions Step Seventeen Fit the RH (14) and LH (15) drawer sides to the drawer back (16) using 30 mm screws (L), Step Eighteen Slide drawer bottom panel (9) into the drawer box grooves, pay attention to correct position. Position drawer front (13) onto drawer box, turn locking nuts (D) clockwise to lock.
Page 14
Step by step assembly instructions Step Nineteen Pull out the runners, then ensure plastic securing pegs are to the OUT position. Page 14 NAN 03/14...
Page 15
Step by step assembly instructions Step Twenty Slide the drawer box tilted until the stop. ttach the drawer box leaning on the runners. Push the plastic securing pegs in the IN position Page 15 NAN 03/14...
Page 16
Step by step assembly instructions Step Twenty-one Use the small plastic knob of the runners to align the drawers if needed. Page 16 NAN 03/14...
NOT be used, as may result in damage. PLEASE KEEPTHESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171Victoria Street London SWIE 5NN www.johnlewis.com Page 17 NAN 03/14...