Table of Contents
Advertisement
Step Two
Two persons required.
Lay part (09) on the ground. PLEASE PLACE THE PARTS ON A SMOOTH SURFACE, in
order not to scratch the paint. Please take the doors from the box as per picture below
according to the arrows direction shown. All fittings (A) must be screwed into the pre fitted
cams on the front panel (11).
Step Three
Two persons required.
Please position (02), (03), (04) and (08) parts as shown in the picture. All fittings ( A ) must go
into prepared holes with the cam. Side panels (02) and (03) attach to the shelf (04) abd base
(08) according to the arrows direction shown. If cams don't lock into place please use
screwdriver to adjust them. After all pieces are pre assembled, please use screwdriver to
adjust the cams and tighten up all the components.
Advertisement
Table of Contents
