Summary of Contents for John Lewis Essence 803/14012
Page 1
John Lewis Essence Oak 2 door wardrobe Stock number: 803/1 401 2 Thank you for purchasing this Essence oak 2 door wardrobe. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product Pre-assembly preparation...
Page 2
If any components are missing, please contact your local John Lewis Branch. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product. Always lift the unit from the base when moving it, do not drag along the ground.
Page 5
Step Two One or more persons lift up the front section (F) with the hinges on the inside and the front inside rail with the 4 screw holes is at the bottom and place onto the top of the base unit. Push the front up against the sides (D) (E) so there is no gap between Fittings the vertical ends of the front panel and the side panels.
Page 6
in the front two corners and 6x30mm screws(H) ensuring the cornice runs around the front and 2 sides.
Page 7
Step Six Check that the doors are aligned correctly and if necessary adjust the door hinges as shown below. Check that the magnets hold the door closed and that the doors are aligned correctly as shown below. Lateral Hinge Adjustment Vertical Hinge Adjustment Horizontal Hinge Adjustment Horizontal Magnetic Catch...
Page 8
Care and Maintenance Wood Furniture The Essence range has been sourced by John Lewis from the finest American Oak and each piece has been carefully constructed to ensure it will give you years of pleasure. The natural characteristics of this oak range may include small cracks, knots, blemishes and grain pattern variations which all add to the natural charm and beauty of this furniture product.
Need help?
Do you have a question about the Essence 803/14012 and is the answer not in the manual?
Questions and answers