Menu/Internet/Ethernet Settings - Edision Progressiv HDC NANO User Manual

Full hd sat receiver, dvb-s2
Table of Contents

Advertisement

► Menu/Internet/Ethernet Settings

Note: The IP Address, Subnet Mask, Gateway, DNS Preferred and DNS Alternate items are only
accessible if the 'Off' value is set at the 'DHCP' item.
Functions and settings in the menu:
DHCP:
IP Address:
Subnet Mask:
Gateway:
DNS Preferred:
DNS Alternate:
Mac Address:
WIFI Auto Start:
Wireless:
Note: Use the numeric buttons on the remote control to input numbers.
Exit the 'Network Local Settings' menu by pressing the EXIT button.
When running a DHCP server on your network, it is possible to assign an IP
address automatically to the receiver. For this purpose, set the 'On' value
here. If DHCP is not used in your network, enter the appropriate values
manually for the following items.
Enter an unassigned IP address from your network here.
Enter the netmask corresponding to the network here.
Enter the IP address of the Gateway to the Internet here.
The IP address for a so-called name server (DNS Server) can be indicated
here.
The IP address for an alternative name server (DNS Server) can be
indicated here.
This item is defined hardware-sided and shows the identifier of the network
interface. This item is not changeable.
Automatic connection with the WLAN after switching on.
WLAN name (SID)
Page 33

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Progressiv HDC NANO and is the answer not in the manual?

Table of Contents