Assembly - ProForm PFEL07807.1 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own Phillips screwdriver
adjustable wrench
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
5/16" Nylon
Locknut (106)–4
5/8" Wave
Washer (102)–6
5/16" x 1" Patch
Screw (81)–11
, and rubber mallet
M6 Split
Washer
5/16" Split
(111)–10
Washer (105)–5
#8 x 3/4"
Pivot Spacer
Screw (78)–4
(71)–4
5/16" x 2 1/2" Button
Screw (88)–8
.
#10 Fender
M10 Split
Washer (80)–10
Washer (110)–6
#10 x 1/2"
Screw (79)–10
5
,
5/16" Washer
(104)–6
5/16" x 1.5" Button
Bolt (73)–4
M10 x 20mm Patch
Screw (108)–6