ProForm PFEL07807.1 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
With the help of another person, place two
packing inserts from the packing material under
the rear of the Frame (1) so that the Frame is
lifted off the floor. Have another person hold
the elliptical exerciser to prevent it from
moving from side to side until this step is
completed.
Attach the Rear Stabilizer (3) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the packing inserts and lower the
Rear Stabilizer.
2. With the help of another person, place two pack-
ing inserts under the Frame (1) so that the
Frame is lifted off the floor. Have another per-
son hold the elliptical exerciser to prevent it
from moving from side to side until this step
is completed.
Attach the Front Stabilizer (2) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the packing inserts and lower the
Front Stabilizer.
1
1
88
2
6
3
88
1
2
88
88