Using The Footswitch - Tascam DR-40 Reference Manual

Using the footswitch

Press a pedal on the footswitch to operate the unit. The
function of each pedal corresponds to the assignment shown
on the REMOTE screen.
Mode functions
The functions for each mode are as follows.
MODE
L
PLAY
.
RECORD 1
8
R
ECORD 2
8
MINUTES
FOOT SW
C R
7/9 /
INC
0/9
MARK
0/9
VSA
7/9
13 – Using the REMOTE jack
Remote control (TASCAM RC-10)
Setting the wired remote control
Make wired remote control settings on the REMOTE screen.
1 Press the MENU button to open the MENU screen.
2 Use the + and – buttons to select the OTHERS menu,
and press the ENTER/MARK or / button to open the
OTHERS submenu.
3 Use the + and – buttons to select REMOTE, and press the
ENTER/MARK or / button to open the REMOTE screen.
4 Use the + and – buttons to select CONTROLLER and press
the ENTER/MARK or / button.
Wired remote
control
TASCAM RC-10
(sold separately)
103
TASCAM DR-40