Tascam DR-40 Reference Manual page 85

File names after division
TASCAM_0003S56_01.wav (part before division point)
TASCAM_0003S78_01.wav (part before division point)
TASCAM_0003S56_02.wav (part after division point)
TASCAM_0003S78_02.wav (part after division point)
• MP3 files cannot be divided.
• Division will not be possible if the time between any marks
is less than two seconds.
• If the SD card has insufficient open space, division might
not be possible.
• Division is not possible if the file name would become more
than 200 characters long.
• Division is not possible if the name that would be given to a
new file is the same as the name of an existing file.
• If you divide a project that has virtual files, those files will
also be divided simultaneously.
TIP
Add marks during recording at positions where you want to
divide a file. (See "Mark function" on page 57.)
7 – Quick Operations
Increasing the perceived overall sound pressure
to enhance listenability (Level Alignment)
If the playback sound is very small and indiscernible, the
perceived overall sound pressure can be increased to enhance
listenability. (Level Alignment)
1 While the Home Screen is open when stopped or
playing back, press the QUICK button to open the Quick
menu screen.
When stopped
2 Use the + or − button to select LEVEL ALIGN and press
the ENTER/MARK button.
3 A screen to enable/disable the level alignment function
appears.
During playback
85
TASCAM DR-40