Tascam DR-40 Reference Manual page 10

2 – Names and Functions of Parts
Press when the 3/4 input level meter pull-up is displayed
to switch to the 1/2 input level meter pull-up.
Press and hold when recording or playing back in DUAL
or 4CH mode to use the solo function, which switches the
monitored sound from other sources to channels 1 and 2.
Press and hold to solo channels 1 and 2.
(HOME) [8] button
7
Press this button during playback to cause the playback
to pause at the current position. Press this button during
pause time to return to the beginning of the playback file.
Press this button during recording or recording standby to
cause the recording to stop.
When any other screen is open, press this button to return
to the Home Screen. Use this button to answer "NO" to a
confirmation message.
Press and hold this button to turn the unit's power ON or
OFF.
8 + button
When the Home Screen is displayed, press this button to
increase the output level from the built-in speaker or
/LINE OUT jack. During adjustment, a volume indicator
will be displayed in a pull-up window.
When the Playback Control screen is displayed, press this
button to increase the playback speed.
10
TASCAM DR-40
When a setting screen is open, use the button to change
the setting of the selected item.
9 MENU button
When the Home Screen is displayed, press this button to
open the MENU Screen.
Press this button to return to the MENU Screen from the
various setting screens.
When the MENU Screen is displayed, press this button to
return to the Home Screen.
When the IN and OUT points are set in the file and the
Playback Control screen is displayed, press this button to
turn on or off loop playback.
0 . button
Press this button to return to the beginning of a playback
file that is playing or stopped in the middle. When the IN
and OUT points are set between the current position and
the beginning of the playback file, pressing this button
skips to those points.
If you press this button when a file is stopped at its
beginning, the unit will skip to the beginning of the
previous file.
Press and hold this button to search backwards.
Press this button while pressing and holding the ENTER/
MARK button to return to the previous mark.