ProForm PFBE14530 User Manual page 9

11. Attach the Seat (16) to the Bench Frame (1) with
an M6 x 63mm Screw (33), an M6 Washer (34),
and two M6 x 16mm Screws (40).
12. Slide a Pad Tube (12) into a hole in the Leg
Lever (7). Wet both sides of the Pad Tube with
soapy water. Slide two Large Pads (19) onto the
Pad Tube as shown. Press two Large Pad Caps
(29) into the Pad Tube. Repeat with another
Pad Tube and the Leg Lever.
Slide the last Pad Tube (12) into the hole in the
Bench Leg (2). Wet both sides of the Pad Tube
with soapy water. Slide two Small Pads (20) onto
the Tube as shown. Press two Small Pad Caps
(28) into the Pad Tube.
13. Attach the Curl Pad (18) to the Curl Post (10) with
two M6 x 16mm Screws (40).
14. Make sure that that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTMENTS, beginning on the following page.
11
16
40
12
28 20
29
19
7
12
13
18
9
1
34
33
2
12
12
19
29
10
40
20
28