Sf/Cpm Leds - Alcatel 7450 ESS-7 Installation Manual

SF/CPM LED
Figure 37
1 3
2
Table 34
Table 34: SF/CPM Field Descriptions
Key Label/Part
1 Captive screws
2 Ejector lever
3 Reset
Power
Status
M/S
7450 ESS-7
S
displays the SF/CPM front panel faceplate.
5 6 7
4
Figure 37: SF/CPM Front Panel
describes the fields and LED states.
Sub
category
Secures the SF/CPM in place.
Ejector levers are used to seat and disengage the connectors to and from
the backplane.
A recessed button used to restart the SF/CPM. Insert a small object such
as a pen tip to depress the button.
• Blue: Power on.
• Unlit: Power off.
• Green: Operationally up and administratively up.
• Amber: Operationally down but administratively up.
• Amber (blinking): Qualified, but previously failed.
• Unlit: Not operational, shutdown, or administratively down.
Ctl Master/Slave SF/CPM designation:
• Green: Indicates that the SF/CPM is designated as the primary SF/CPM
in a redundant system.
• Green (blinking): Indicates that the SF/CPM is operating as the
secondary SF/CPM in a redundant configuration.
8 11
9 10
Description
Appendix A: LEDs and Optics
13
12
2
ESS1004
Page 109
1