Playing In Random Order (Random Playback); Playing Tracks In A Specific Order (Program Playback); Stopping Digital Outputs - Marantz SA-11S3 Owner's Manual

ENGLISH

Playing in random order (Random playback)

1
During stop mode, press
RANDOM
.
The "RNDM" indicator on the
display lights.
2
Press 1 .
The tracks start playing in random
order.
n Stopping Random Playback
RANDOM
Press during stop mode.
The "RNDM" indicator on the display goes off.
NOTE
9
• Each press of during random play changes the track
in random manner.
• The random playback mode is canceled if you set power
to standby, turn off power, or open the disc tray.
15
Playing tracks in a specific order
(Program playback)
1
During stop mode, press
PROGRAM
.
"PROG" lights in the display, and
the mode switches to program
playback mode.
2
Use NUMBER ( 0 9 , +10 ) to
–
select the tracks you want to
program.
G Example H
To program tracks 3 and 12 to be played
3 +10 2
in that order, press , , and one
after the other.
3
Press 1 .
Playback starts in the programmed order.
n Adding tracks for program playback
Tracks can be added to the end of program when program
is remaining ("PROG" indicator is lighting up) and in stop
mode.
0 9 +10
Use NUMBER ( – , ) to select the tracks you want to
program.
n Checking programmed track orders
9
While stopped, press .
Each time you press it, tracks are displayed in the order in
which they are programmed.
n Canceling a track from program playback
CLEAR
While stopped, press .
CLEAR
When is pressed, tracks are deleted in order from
the last programmed track.
n Clearing the all programmed track
PROGRAM
Press during stop mode.
• Program can also be cleared by pressing
open the disc tray.
You can specify up to 20 tracks each for program playback.
NOTE
• Programmed playback is not possible with MP3 and WMA
files.
• The program playback mode is canceled if you set power to
standby, turn off power, or open the disc tray.

Stopping digital outputs

Stops all media and source digital signal outputs from the
rear panel's digital audio output connectors (COAX., OPT.) to
minimize digital audio output circuit noise which could interfere
with the analog audio output signal.
1
During stop mode, press
2
Use ui to select "Digital Out",
ENTER
and press
3
ui
Use to select "Off", and
press ENTER .
[Selectable items]
: Outputs the digital signal.
On
: Digital signal is not output.
Off
• When digital output is turned off, the "D OFF" indicator
lights up on the display.
• The "digital output off" has a memory retention function
where the settings remain stored and unchanged even when
the disc is changed or the power is turned off.
NOTE
This unit does not output Super Audio CD multi-channel layer
and stereo layer digital audio signals from the digital audio
OPEN/CLOSE
to output connectors.
Playback CDs
MENU
.
.