Avery Dennison MONARCH 939I Operating Instructions Manual page 18

12. Decide if you want to change the default (No) and press either
to display your selection. If you select "Yes," the last tag in the batch is
cut. The printer must feed one or two tags past the printhead to cut the
last tag in the batch. Press N.
13. Decide if you want to see this prompt in Batch Entry mode and press
either or
in the batch is cut. The printer must feed one or two tags past the
printhead to cut the last tag in the batch. Press N.
14. Decide if you want to change the default (No) and press either
to display your selection. If you select "Yes," the knife cuts before the
first tag and cuts after batch, so the tags are cuts in strips. Press N.
15. Decide if you want to see this prompt in Batch Entry mode and press
either or
16. Decide if you want to change the defaults (No) and press either
to display your selection. If you select "Yes," the knife does not cut
before the first tag in a batch, but does cut between each tag and after
the last tag in a batch.
Press N.
2-4 Setting Batch Options
Cut After Batch?
Prompt? Yes
to display your selection. If you select "Yes," the last tag
Cut After Batch?
No
No Cut Before?
Prompt? Yes
to display your selection. Press N.
No Cut Before?
No
Quantity?
Prompt? Yes
or
or
or