Flat Surface Mount - Avery Dennison MONARCH 939I Operating Instructions Manual

F l a t S u r f a c e M o u n t
Make sure all surfaces you apply the dual lock fasteners to are free from dirt
and oil. If necessary, clean with isopropyl alcohol.
Pull the cord through the large hole in the stand.
1.
Set the keyboard into the stand.
2.
Attach either the rubber pads or dual lock fasteners to the base of the
3.
keyboard stand. If using the dual lock fasteners, attach the other side of
the fastener to the tabletop.
To remove the keyboard from the stand, lift the keyboard from the
bottom.
A-2 Specifications & Accessories