Configuring The Scanner; Reset To Default Values; Set The Minimum Bar Code Width - Avery Dennison MONARCH 939I Operating Instructions Manual

C o n f i g u r i n g t h e S c a n n e r
The scanner may already be configured to work with your ADK script. If not,
use these bar codes to configure the scanner:

Reset to default values.

Set the communication port to match the keyboard's settings.
Set the minimum bar code width (if necessary).
For additional bar codes to program your scanner, refer to your
scanner's Installation and User's Guide for more information.
R e s e t t o D e f a u l t V a l u e s
To reset the scanner to default settings, scan this bar code:
C-4 Configuring the System