Bilge Strainer Inspection; Electric Bilge Pump Strainer Inspection - Yamaha WaveRunner Service Manual

INSP
ADJ
1
1
3
BILGE PUMP
2
BILGE PUMP

Bilge strainer inspection

1. Inspect:
• Bilge strainer
Contaminants → Clean.
Cracks/damage → Replace.
Inspection steps:
• Remove the deck beam.
Refer to "SEATS AND HAND GRIP" in
Chapter 8.
• Remove the coupling cover.
• Disconnect the bilge strainer case 1
from the bilge strainer.
• Inspect the bilge strainer.
• Install the coupling cover.
• Install the deck beam.
Refer to "SEATS AND HAND GRIP" in
Chapter 8.

Electric bilge pump strainer inspection

1. Inspect:
• Cap
• Strainer
Contaminants → Clean.
Inspection steps:
• Remove the band 1.
• Remove the cap 2 and strainer 3.
• Inspect the cap and strainer.
• Install the strainer and cap.
• Install the band.
3-28
E