Table of Contents
Advertisement
–
+
ELEC
1
2
OFF THROTTLE STEERING SYSTEM
STEERING SENSOR
1. Check:
• Steering sensor
Malfunction → Replace the steering
sensor.
Checking steps:
• Turn the handlebar all the way to the left
or right, and then release it.
• Install a plastic tie 1 loosely around the
center of the handlebar grip as shown.
• Hook a spring gauge 2 onto the plastic
tie.
• Hold the spring gauge at a 90° angle
from the handlebar, and then pull the
spring gauge with a force of 10 kgf
(22 lb).
When handlebar
pulled
ON
• Check that the following is displayed in
the "Engine Monitor" window of the
Yamaha Diagnostic System.
• Use the same procedure to check that
the steering sensor operates correctly
when the handlebar is turned to both the
left and right. Replace the steering sen-
sor if it is a malfunction.
53
E
When handlebar
not pulled
OFF
Advertisement
Table of Contents
