Table of Contents
Advertisement
INSP
CONTROL SYSTEM
ADJ
PERIODIC SERVICE
CONTROL SYSTEM
Steering master inspection
1. Inspect:
• Steering master
Excessive play → Replace the steering
master.
Refer to "STEERING MASTER".
Inspection steps:
• Move the handlebar up and down and
back and forth.
• Check the excessive play of the handle-
bar.
Steering cable inspection and adjustment
1. Inspect:
• Jet thrust nozzle difference of distances
a and b
Out of specification → Adjust.
Difference of distances a and b:
Maximum 5 mm (0.2 in)
Inspection steps:
• Set the control grip in the neutral position.
• Turn the handlebar lock to lock.
• Measure distances a and b.
• If difference of distances a and b is not
within specification, adjust the cable joint.
42
E
3
Advertisement
Table of Contents
