Steering Cable Installation - Yamaha WaveRunner Service Manual

HULL
HOOD
7
5
6
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
4
3
5
6
SERVICE POINTS

Steering cable installation

1. Install:
• Steering cable
Installing steps:
• Connect the cable joint 1 to the ball joint
2.
• Insert the projection 3 on the steering
cable completely into the indentation 4
in the steering stopper.
• Slightly lift up the steering stopper plate
5 on the steering stopper, and then
rotate it clockwise.
• Rotate the steering stopper plate 6 on
the steering stopper counterclockwise,
making sure to fit the hole in the stopper
plate 6 onto the projection 7 on the
other steering stopper plate 5.
92
E