Table 17 D20C Options - GE D20 Technical Overview

GE Grid Solutions
Control Outputs
Physical
Output Configurations
Contact Duration
Contact Rating
Coil Status Check
Switches
Component Isolation Rating
Dielectric Rating
D.20 Link Ports
Maintenance Port
Power Requirements
Size
2.4.10.3 D20C Options
The following D20C options are currently available:
GE Part
Number
504-0002 WESDAC D20C+ (20-60 VDC) standard.
504-0003 WESDAC D20CHV (40-150 VDC) high-voltage.
517-0169 D20C termination board with compression blocks for status, controls and analogs. Includes DB25
connector for D20KI/KI2 interposer panels.
517-0180 D20CD with DB25 connectors for status, controls and analogs.
517-0326 D20CB termination board with barrier strips for status, controls and analogs. Includes DB25 connector
for D20KI/KI2 interposer panels.
517-0217 D20CX termination board with separable compression blocks for status, controls and analogs.
Includes DB25 connector for D20KI/KI2 interposer panels.
517-0332 D20CDI 24V (isolated commons) and DB25 terminations for status, controls and analogs.
517-0333 D20CDI 48V (isolated commons) and DB25 terminations for status, controls and analogs.
517-0263 D20CDI 130V (isolated commons) and DB25 terminations for status, controls and analogs.
517-0239 D20C4Z termination board with compression blocks for 48VDC status inputs, controls and analogs.
517-0253 D20C4Z termination board with compression blocks for 110VDC status inputs, controls and analogs.
517-0267 D20C4Z termination board with compression blocks for 220VDC status inputs, controls and analogs.
GE Information
8 relays plus two Master Trip/Close relays
•
8 T/C pairs
•
6 T/C + 1 R/L pairs
•
4 T/C + 2 R/L pairs
•
2 T/C + 3 R/L pairs
•
4 R/L pairs
•
8 isolated Form C contact outputs
15
Programmable 1 to 2 ms in 1 ms intervals or 1 to 2
intervals (protocol dependent)
60 W max, 3 A max, 220 VDC max (1 Form-C or -A contact)
Every 500 µs
Local enable/disable switch
1500 Vrms
1000 VDC
2
9600 baud, RS-232
20-60 VDC, 5 W typical; 11 W full load with 24 V contact wetting
•
D20C assembly: 19" x 5.25" x 2.5"
•
D20C analog input & analog input/output daughter boards:
8.5" x 3"

Table 17 D20C Options

Description
PRPI-019-3.00-10
D20/D200 Technical Overview
15
s in 1 s
61