Table of Contents
Advertisement
D20/D200 Technical Overview
1.10 Firmware
The D20/D200 software is based on a core set of software modules, collectively referred to as
the base system. The base system is programmed into the D20/D200 on-board flash memory as
firmware. Processing and data acquisition functionality is distributed between the I/O peripheral
processors, which have similar but smaller base systems, and the D20 main processor. The base
system for the D200 is commonly referred to as the CCU base system. For a detailed description,
see section 2.2.3 , Firmware.
D20/D200 base systems have the following features:
• System calls are available for user-generated software
• D20 peripheral firmware and processes
• Support of libraries and processes for a wide range of I/O devices
• Database manager facility (WESDAC Interface Node)
• Background system diagnostics
• Comprehensive diagnostic and maintenance facility support (WESMAINT)
1.11 Configuration and Maintenance Software
The D20/D200 is equipped with a range of maintenance utilities to assist the user in configuring,
testing and monitoring the system:
• SGConfig, a PC-based tool for configuring D20/D200 hardware and software remotely over
a network or locally through the maintenance port.
• LogicLinx, an IEC 61131-3 compliant soft logic automation tool comprising a executor
running in the D20/D200 firmware and PC-based editor for creating PLC-like programs.
• WESMAINT is a maintenance facility that resides on the D20 and D200 accessed through a
simple terminal to view collected data and system status and, for some applications, make
changes to the configuration.
• 68K Monitor, an on-board advanced diagnostic tool accessed thorough a terminal interface
and used for troubleshooting, including memory examination, dumping and editing, setting
break points, and CPU usage and process profiling.
For a detailed description, see 3. Configuration and Maintenance Software.
1.12 System Documentation
A full suite of D20/D200 user documentation is provided with each system:
• Hardware Manual, consisting of:
− Hardware installation, operation and maintenance guides
• Software Manual, consisting of:
22
PRPI-019-3.00-10
GE Grid Solutions
GE Information
Advertisement
Table of Contents
