Interposing Relay Panel - GE D20 Technical Overview

Remote terminal unit
Hide thumbs Also See for D20:
Table of Contents

Advertisement

GE Grid Solutions
Item
Maintenance Port
Power Requirements
Size
LED Indicators
2.4.8.6 D20K Options
The following D20K options are currently available:
GE Part Number
508-0101
WESDAC D20K (20-60 VDC) standard.
508-0103
WESDAC D20KHV (40-150 VDC) high-voltage.
517-0164
D20K 32 channel digital output termination board with compression blocks.
517-0143
D20KR 32 channel digital output termination board with DB25 connectors.
517-0218
D20KX 32 channel digital output termination board with separable compression blocks.
517-0236
D20K 32 channel digital output termination board with compression blocks and solid-state
relays.
517-0242
D20K4Z 32 channel digital output high voltage termination board with compression blocks.

2.4.9 Interposing Relay Panel

For applications requiring heavy-duty control ratings, the D20K can be connected to field
equipment through interposing relays. The standard D20KI interposing relay panel is equipped
with P&B KUEP and KUP interposing relays (10 A at 150 VDC and 10 A at 240 VAC
respectively). It is used in conjunction with a D20KR termination panel, as shown in Figure 35.
GE Information
9600 baud, RS-232
20-60 VDC, 4 W typical at 24 V, 11 W max. at 24 V with all relays energized
D20K logic board and D20K relay termination board assembly: 19" x 5.25" x 2.5"
D20KI1 interposing relay board (compression terminals): 19" x 5.25"
D20KI2 interposing relay board (barrier terminals): 19" x 7"
D20KR termination board for D20KI1/D20KI2: 19" x 5.25"
D20KI-OPC (517-0215): Interposing relay panel for D20SD and D20CD,
equipped with sliding link terminal blocks.
Common LEDs, described in Section 2.2.1 , Hardware.
Local (GREEN) LED, which turns on when the I/O module is set to Local module
using the Local/Remote switch, or if the module's control software has been
disabled.
Remote (RED), which turns on when the module is in Remote mode.
Control points (RED), which turn on when the particular control point is enabled.
Table 13 D20K Options
D20/D200 Technical Overview
Description
Description
PRPI-019-3.00-10
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

D200

Table of Contents