Figure 25 D20 I/O Peripheral – Disconnect Termination - GE D20 Technical Overview

GE Grid Solutions
• Disconnect: Field wiring is terminated onto plug-on terminator blocks (#12 AWG [2.05mm]
max, blade screwdriver - 0.6 x 3.5 x 100 mm), which then mate with board-mounted headers
on the D20 I/O Peripheral. This is illustrated in Figure 25, with the board-mounted header
shown on the right, and the cable plug shown on the left.
Figure 25 D20 I/O Peripheral – Disconnect Termination
• Barrier: Field wiring is terminated onto barrier terminals (#10 AWG [2.59mm] max, #6-32
screws) on the D20 I/O peripheral, as illustrated below:
GE Information
Figure 26 D20 I/O Peripheral – Barrier Termination
D20/D200 Technical Overview
PRPI-019-3.00-10
39