Advertisement
Quick Links
RFID locks operate with an RFID Card. In assigned use functionality, an RFID Card is assigned to operate the lock. The user presents
the assigned RFID Card to unlock and closes the door to automatically lock. Management staff operates the lock with either the
Programming Key unique to the lock system or any registered Manager Bypass Key.
Lock Parts
Front Unit
Reader
Key Slot
Pull Handle
Rear Unit
Cover Plate
Advanced Security
Keys
Programming Key
Registers Manager Bypass Keys
Provides lock access in case of forgotten/lost user
credential (card or key)
Allows management audit/inspection
1 Programming Key required per lock system
Key Insertion
Standard Body
Digilock logo must face up on standard and vertical body locks.
Product Guide
RFID Locks Advanced Security
LED Usage
Indicator
Key Button
Standard Body
DAR1-APS1
Mounting Holes
Cover Plate Screws
1/2" (12mm) Deadlatch
Manager Bypass Key
Assigns RFID Card and User Key
Provides lock access in case of forgotten/lost
user credential (card or key)
Allows management audit/inspection
Provides external power in case of battery failure
Up to 25 Manager Bypass Keys may be registered
per lock
Vertical Body
Assigned Use
DAR1-APS1 & DAR1-APV1
Key Slot
Pull Handle
Vertical Body
DAR1-APV1
LED Usage
Indicator
Reader
Key Button
RFID Card
User Key
Operates the lock instead of
RFID Card
ADA compliant*
*US Access Board requires 5% of all
locks to be ADA compliant.
Phone: 707 766 6000
www.digilock.com | sales@digilock.com
Advertisement
Related Manuals for Digilock DAR1-APV1
Summary of Contents for Digilock DAR1-APV1
- Page 1 ADA compliant. Up to 25 Manager Bypass Keys may be registered per lock Key Insertion Standard Body Vertical Body Digilock logo must face up on standard and vertical body locks. Phone: 707 766 6000 www.digilock.com | sales@digilock.com...
- Page 2 *The Programming Key will continue to function in express registration mode until it is used to operate a lock. Register/Add Manager Bypass Key(s) Up to 25 Manager Bypass Keys may be registered to a lock. If required, contact your Digilock Product Representative to order additional Manager Bypass Key(s).
- Page 3 Product Guide RFID Locks Advanced Security Assigned Use DAR1-APS1 & DAR1-APV1 Assign User Credential (RFID Card or User Key)* Assign an RFID Card Press and hold ` for 5 seconds until a two-tone beep is heard and the LED starts to flash.
- Page 4 The lock is binding which means that either door alignment or items in the locker are preventing the lock from operating. Press on the door while operating the lock. If error condition persists, contact Digilock Support for assistance. 2 sets of three beeps: The batteries are low.