Data Hold - Lutron Electronics PMS-713 Operation Manual

3) It is recommended that the test pins are inserted to a
minimum depth of 2 mm into the material under test.
If a depth of 2 mm can not be obtained, then insert the
test pins to their maximum achievable depth.
4) Display will show the moisture contents in " %
moisture content " directly.
Consideration :
If the sample under test has a high moisture
content it may take a few minutes to obtain a
stable reading.

4-2 Data Hold

* During the measurement, press the " Hold Button "
( 3-4, Fig. 1 ) momentarily to hold the measured
value. The LCD will show a " HOLD " symbol.
* Press the" Hold Button " once again to release the
data hold function.
5