Page 3
Detailed information on the product can be found in the operating instructions which are available for download on our website at www.renfert.com.“ Symbols In the instructions for use and on the unit itself you will find these symbols with the following meanings: Danger This indicates a direct risk of injury.
Page 4
17 Connection set 18 Suction hose The other units are covered in the full set of operating instructions available on the internet. Scope of Delivery Silent TS2 Operating instructions Quick reference card Dust bag (ready for us in the dust drawer)
Page 5
Connection ⇒ Connect to the compressed air supply system, using a connection kit if necessary (17, Fig. 1). Observe the minimal / maximum connection pressure, see technical data! Compressed air should be clean and dry (without condensed water). Wet compressed air can damage the unit.
Page 6
(21) and the glue flap faces upwards. Use only original Renfert dust bags (see spare parts list). ⇒ Inspect the dust drawer seal for damage and replace it, as required (24).
Page 7
Technical Data Working Voltage 230 V 120 V Permissible mains voltage: 220 - 240 V 120 V Mains frequency: 50 / 60 Hz 60 Hz Suction turbine power: *) 1400 W 1400 W max. connecting power: *) 2000 W 360 W Total connected power: *) 3400 W 1800 W...