Symbols This manual contains symbols also found on the appliance itself with the following meaning: Danger! Immediate risk of injury. High Voltage! Danger – high voltage. Caution: Risk of damage to the unit if the instruction is not followed. Notice A general notice that improves and eases use.
98° Press grinding table back onto ball head. Fig. 5 3.1.2 MT3 pro Turn off appliance and wait, until the trimmer disk comes to an complete standstill. Loosen the knurled nut (20) Adjust the grinding angle with the adjusting screw (19).
Fig. 10 Loading monitoring MT3 pro only The control electronics monitors the loading of the trimmer motor. It gives a warning when the trimmer motor is loaded in a way, that may cause an unacceptable motor temperature and a trigger of the motor thermal fuse...
This appliance may not be used for gringing investment material. Cancer causing dusts are released. Only spare parts and accessories supplied or authorized by Renfert GmbH may be used with this product. If other spare parts or accessories are used, this could have a detrimental effect on the safety of the device, increase the risk of serious injury and lead to damage to the environment or the device itself.
The unit should always be operated under supervision. Risk of injury! Risk of injury if the components used are not approved. Always use original Renfert components. Please observe all applicable accident prevention regulations together with the following safety notes when trimming: Always keep long hair, loose or wide sleeves or other clothing away from the trimmer.
Guarantee Renfert gives a 3-year guarantee on all parts of the MT3 / MT3pro provided that the product is used in accordance with the operating instructions. The original sales invoice of the specialist depot is required for a claim under guarantee.