Part Identification Chart - ProForm 831.150320 User Manual

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part, from the PART LIST in the center of this manual. Important:
Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts
bags, check to see if it has been pre-assembled. If a part is missing, call toll-free 1-877-992-5999.
25mm Round Inner Cap (20)
25mm Round Angle Cap (60)
M10 Washer (53)
M8 Nylon Locknut (58)
M10 Nylon Jamnut (69)
M10 Nylon Locknut (56)
M6 x 38mm Screw (50)
25mm Square Inner Cap (26)
1/4" x 9mm Allen
Head Set Screw (51)
M8 Washer (54)
M6 Washer (55)
M10 x 43mm Button Bolt (49)
M6 x 63mm Screw (47)
M8 x 63mm Button Bolt (62)
M10 x 68mm Button Bolt (64)
M10 x 72mm Flat Head Screw (46)
M10 x 72mm Button Screw (44)
M10 x 75mm Button Bolt (61)
M10 x 78mm Button Bolt (65)
M10 x 81mm Hex Head Bolt (59)
M10 x 88mm Button Bolt (42)
M10 x 93mm Button Bolt (45)
48mm Round
Inner Cap (22)