Wash Temperature - ALLIANCE TR3000WN User Manual

Topload washers

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

• Items should move freely through the wash water for best

cleaning results.

• When washing very large items, do not fill washtub as full

as with other loads.

Load Size - Auto Fill Water Levels

• This washer has an Auto Fill feature. It will automatically se-

lect the proper water level for the load size and type of fab-

ric that is being washed. Auto Fill is recommended for the

best wash performance in all cycles.

• Auto Fill works in multiple stages. During the first fill step of

the cycle, water will fill to the minimum level programmed

for the specific cycle selected. Once the wash step begins,

the control starts sensing the load. Once sensing is com-

plete more water may be added to optimize wash results.

• If you pause the cycle after it started, the Auto Fill sensing

stage will begin again once the cycle is resumed. It will de-

termine if any items have been added and if more water is

needed.

• Overloading the washtub can result in poor washing and

rinsing.

Load Size - Manual Water Levels

• Although the Auto Fill selection is recommended for the

best wash performance in all cycles, there are three man-

ual load size selections as well.

• The water level in your washer should fit the size of your

wash load. Small loads will use lower water levels. There

must be enough water in the washtub to allow items to

move and turn over freely.

WRONG Water Level for Size of Load

DO NOT COPY or TRANSMIT

W282I_SVG

CORRECT Water Level for Size of Load

• Overloading the washtub can result in poor washing and

rinsing.

IMPORTANT: If in doubt when using a manual selec-

tion, always use a larger load size. Most average loads

will require the Large Load Size setting. Failure to have

the correct volume of water relative to the load may de-

crease washer performance.

Manual Load Sizes

Small

Medium

Large

The manual load size water levels will vary depending on the

wash cycle selected. If the wrong load size is selected, the ma-

chine may add more water.