Door Height Adjustment - Russell Hobbs RH90FF176-WD Instruction Manual

Door Height Adjustment

If the doors of the appliance are not aligned then the height of them can be
adjusted, if required please follow the below steps.
Note: The maximum height adjustment is 5mm
Rotate the locking nut clockwise (as shown in the diagram below) with a
wrench for 2 full rotations to loosen it. You can now rotate the adjusting nut
(as shown in diagram below) to raise or lower the height of the door. Once
the door is set to your desired position, then tighten the locking nut by
rotating it anti-clockwise.
When the fridge door is low:
Open the door, use a wrench to rotate the adjusting nut anti-clockwise to
raise the height of the door. Once the doors are aligned, then tighten the
locking nut by rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower
the height of the door. Once the doors are aligned, then tighten the locking
nut by rotating it anti-clockwise.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
7