Russell Hobbs RH90FF176-WD Instruction Manual page 18

Water Dispenser
Re-attaching the water valve, seal ring and water tank
To re-install the water valve, ensure that nozzle of the water valve is pointing
downwards and that the groove on the body of the water valve is aligned with
the groove on the hole of the dispenser molding. Once this is done you can
insert the water valve into place by pushing it downwards at a 45º angle until it
clicks into place.
Refit the seal ring to the bottom of the water tank, ensuring there are no
creases or wrinkles.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Groove
Nozzle
or visit us at www.productcare.co.uk
18
Water
dispenser
Moulding
hole
Water
dispenser
moulding