Table of Contents
Advertisement
Door Reversal
You will need to tilt the appliance backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the appliance flat on its
side.
Tools Required: Philip head screwdriver and hexagonal spanner.
For your own safety, a minimum of 2 people should lift or tilt this product.
1. Remove the screws holding the top cover in place at the rear of the unit. Gently
lift up the rear of the top cover and push it forward to remove it.
2. At the front of the top cover on the underside there is a small plastic blocking
clip on the left hand side that needs to be removed and inserted onto the opposite
side.
3. Remove the 3 screws from the top hinge, either with a cross headed
screwdriver or a spanner.
10
Advertisement
Table of Contents
