Trouble Shooting - Russell Hobbs RH90FF176-WD Instruction Manual

Trouble shooting

Problem Solution
Check that the appliance is switched on.
Check that there has not been a power cut.
Check that the plug is not faulty.
Check that the fuse has not blown.
The fridge/freezer doesn't work
Check that the voltage is correct for the appliance.
Are there any faults with the socket? For this purpose, try
the plug of your appliance by connecting it to a socket
which you are sure is working.
Check that there is not too much food in the appliance.
Check that the temperature is set to a suitable
temperature.
Check that the appliance is not placed in direct sunlight,
or too near to a heating source.
Check that the ambient temperature is within the
The temperature inside the
operation limits of the appliance.
appliance is not cold enough
Are the doors of the appliance opened frequently? Once
the door is opened, the humidity found in the air in the
room enters the appliance, especially if the humidity
levels in the room are very high. The more frequently the
door is opened in humid conditions the more chance of
the build up of moisture.
Increase the working temperature by adjusting the
temperature to a higher level.
The temperature within the The lowest setting/temperature should only be used as a
appliance is too cold. rapid cool setting and should only be set 2 hours before a
large amount of food is placed in the fridge. If this is not
done the temperature in the fridge compartment could
fall below 0ºC as the compressor will run continuously.
The inner surfaces of the
Caused by condensation - dry the inside of the appliance.
appliance are wet
The outer surfaces of the Caused by condensation - dry the outer of the appliance
appliance are wet carefully.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
27