Temperature Setting - Russell Hobbs RH90FF176-WD Instruction Manual

Usage Information

Temperature setting

Important note: The display will only be illuminated when a button is
pressed or a compartment door opened, at all other times the display will
be in a standby state.
Important note: The control panel will automatically lock itself. Before
adjusting the temperature or selecting any mode the panel must be
unlocked by pressing and holding the lock button for 3 seconds until the
lock symbol disappears from the display.
Note: The standard operating temperature for the fridge compartment
should be between 0°C and 4°C and the standard operating temperature
for the freezer compartment should be between -18°C and -25°C.
Note: The temperature of the freshly stored food and how often the
door is opened affects the temperature in the refrigerator
compartment. If required, change the temperature setting.
Freezer compartment temperature adjustment
To change the temperature of the freezer compartment, press the freezer
temperature adjustment button. The temperature of the freezer can be set
between -16°C and -24°C.
Press the freezer temperature adjustment button until the required
temperature is shown on the display. Please note that during the
temperature setting process the freezer temperature on the display will
flash. Once the required temperature is set the freezer temperature will
flash for a few seconds, the display will be automatically locked and then
after approximately 30 seconds the display will disappear.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
10