Table of Contents
Advertisement
Installation
Drainage connection
The machine is supplied with a drainage hose
attached, which must be connected to a drain.
See the examples below. The height must be
600-900 mm above floor level.
The lower position (600 mm) is always
preferable. Ensure that the drainage hose has
no kinks.
600--900 mm
The machine can also be connected to the drain
via a spigot connection. In this case the hose
should also be 600-900 mm above the floor.
The internal diameter of the hole should be at
least 18 mm.
• Cut the nipple
• Remove burrs from the hole.
See the illustration.
At least 18 mm
28
Electrical installation
Connect the machine by plugging it into an
earthed wall socket. The electrical wall socket
must be placed outside of the installation area
to be easily accessible.
Connection on delivery
The machine is supplied as 1-Phase, 220-
230 V, 50-60 Hz, heat output 2000 W and has a
10 A plug. Any residual current devices must be
type A.
NOTE!
Repairs and maintenance relating to safety or
performance must be carried out by a qualified
professional.
Advertisement
Table of Contents
