Moving through the menus, functions and changing settings is consistent throughout all functions and screens. The following example illustrates typical
operation.
Example – Setting Battery Amp-Hours (to 440 amp-hours in this example)
Screen shown
BATTERY VOLT/AMP
12.6V
ENTER ADVANCED
DSPLY/SETUP SEL►
LAST FULL CHARGE
10 DAYS AGO
ENTER SETUP
MENUS
SET BAT AMP-HRS
220AH
SETTING AMP-HRS
220AH
SETTING AMP-HRS
440AH
SET BAT AMP-HRS
440AH
9
+25.0A
SEL►
SEL►
SET►
SET►
SEL►
USING THE MENUS AND KEYS
Action taken to move to next screen or step
Press NEXT 6 times to move down to Advanced Display/Setup select
screen.
Press SELECT for 4 seconds to move to the top of the Advanced Display
menu.
Press NEXT 8 times to move down to Enter Setup Menus select screen.
Press SELECT for 4 seconds to move to the top of the Setup Menu.
Press SELECT for 4 seconds to move to Battery Amp-Hours parameter
setting screen.
Select desired value with NEXT. Note the word "SETTING" flashes in all
parameter setting screens.
Press SELECT for 4 seconds to save new setting and move back to Battery