Maintenance Schedule; Maintenance Schedule Chart - KYMCO X-Town 300 Manual

Maintenance schedule

Perform the pre-ride inspection (see page 15) at each scheduled maintenance period. This interval
should be judged by odometer reading or by months, whichever comes first.

Maintenance schedule chart:

I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE
The maintenance schedule on the following two pages specifies the maintenance required to keep
the motorcycle in good running condition. Maintenance should be performed according to the
design standards and specifications by the authorized KYMCO dealer.
* Be serviced by the KYMCO dealer, unless you have the proper tools, service data and are
technically qualified.
**
For safety reason, we recommend these items be serviced only by the KYMCO dealer. KYMCO
recommends that the KYMCO dealer should take a road test after each maintenance service.
▆
NOTES:
1. For higher odometer readings, repeat by the service interval illustrated here.
2. Service more frequently for long-term riding in unusually wet or dusty areas.
3. Service more frequently for long-term riding in rain or with full throttle.
4. Inspect every 5000 km (3000 mi) after replacement and replace every 10000 km (6000 mi).
5. Replace every 5000km (3000mi) or every 6 months. Replacement requires mechanical skill.
6. Replace every 2 years. Replacement requires mechanical skill.
30
MAINTENANCE
A: ADJUST L: LUBRICATE D: DIAGNOSE