Adjust Clock; The Setting Procedure - KYMCO X-Town 300 Manual

CONTROLS & FEATURES

Adjust clock

The setting procedure:

1. Turn the ignition switch to the ON position.
2. Push the MODE button for more than 2
seconds to select the ODO mode.
▆
digital clock can be only adjusted in ODO
NOTE: The
mode.
3. Push the MODE button for more than 2
seconds. The "hour" digits will be flashing and
the hour can be adjusted at that moment.
4. Push the RESET button to set the hour.
14
5. Push the MODE button; it will change to
make the "minute" digits be flashing.
6. Push the RESET button to set the minute.
7. Push both the MODE and RESET buttons at
the same time to finish the clock setting.
▆
NOTE: The adjustment will be cancelled if any
button is not pressed within approximately ten
seconds.
▆
NOTE: The clock will be reset to 12:00 when the
battery is disconnected.