Ke-Usb108 Operating Tips - Hagstrom KE-USB108 User Manual

to open a file that is already open in another application. If this
happens, close the other application and open the file again.
"Error saving file":
This error message is shown if the KEUSB108.EXE program
attempts to save a file that is already open in another application,
or if there is not enough disk space. If this happens, close the
other application and try saving the file again.
"One or more key presses have been detected...":
This warning message is shown if the KEUSB108.EXE program
detects a macro sequence which defines a key press without a
matching key release in a following step. Since macros that leave
keys pressed could cause the computer to misunderstand further
keystrokes, a matching key release should be defined in nearly all
circumstances.

KE-USB108 Operating Tips

• When connecting the KE-USB108 to a PC, use a standard USB
A-B type Cable.
• No changes will take place on the KE-USB108 itself until the
configuration has been written to the device. Refer to section on
"File Menu Selections" in this manual for details on how to write
to the KE-USB108.
• The maximum recommended cable length from the computer to
the KE-USB108 is 15 feet. This is also the maximum length that
should be used on wires connecting the switches or keypads to
the KE-USB108 input headers.
• Before using the KEUSB108.EXE configuration program, visit
Microsoft "Windows Update" and get the latest updates for the
operating system. This step is important for making sure the PC
has the latest USB port updates.
23