Table of Contents
Advertisement
Creates a new configuration file by either clicking on
"New" with the mouse or by pressing Ctrl+N on the keyboard.
This option will also return the program screen to the default
settings.
Recall a previously saved configuration file by either
clicking on "Open" with the mouse or by pressing Ctrl+O on the
keyboard. Locate and select the name of the configuration file on
the PC that is to be opened.
Once a configuration setup has been created on the
program screen, it is recommended that it be saved on the PC's
hard disk. Click on "Save" with the mouse or press Ctrl+S on the
keyboard, then choose a filename and location to save the file.
configuration in the KE-USB108 and display it on the screen.
Click on "Read from KE-USB108" with the mouse or press Ctrl+R
on the keyboard to perform this operation.
displayed on the screen to the KE-USB108. The KE-USB108 can
be programmed and re-programmed as many times as necessary.
Click on "Write to KE-USB108" with the mouse or press Ctrl+W
on the keyboard to perform this operation. After the KE-USB108
has been loaded with the new configuration, it will scan according
to the setup just loaded. The configuration is stored on the
KE-USB108 in non-volatile memory so it will be retained until
overwritten by a subsequent write function.
This
option
This option will write the current configuration
21
will
read
the
current
Advertisement
Table of Contents
