Hagstrom KE-USB108 User Manual page 8

Spinner Header:
The KE-USB108 features an Input Header for connection
to a Spinner. We offer a Spinner Cable (our part number
KE-SP3) to connect the KE-USB108 spinner input to the spinner
itself. See the Accessories page of this manual for details on the
KE-SP3.
NOTE: Do not supply power to the spinner interface connector.
Joystick Headers:
The KE-USB108 features four, 3 pin Input Headers, one each
for the X, Y, Z and Rx axis connection to a Joystick. The Rx
axis is labeled W on the KE-USB108.
Cable (our part number MTA100-3-12) to help connect the
KE-USB108
to the potentiometer. See
the Accessories page of this
manual for details on the
MTA100-3-12.
NOTE: Do not supply power to the joystick interface connectors.
KE-USB108 - Spinner interface signal assignments.
joystick input
KE-USB108 - Joystick interface signal assignments.
We offer a Joystick
Gnd for Rx axis
Rx Input
5V = Power for Rx axis
(Rx labeled W on board)
Gnd for Z axis
Z Input
5V = Power for Z axis
Gnd for Y axis
Y Input
5V = Power for Y axis
Gnd for X axis
X Input
5V = Power for X axis
7
A3 = Spinner Signal
5V = Spinner Voltage
GND = Spinner Ground
B3 = Spinner Signal