Table of Contents
Advertisement
The response definitions for each input are shown in the response
definition box on the screen. Initially, the response definition box
contains the words "Not Used". When inputs are defined, the
definition box will then display the label for the response to which
that particular input is assigned. To the left of each definition box
are option buttons that allow an input to be defined as either a
"Single Key" or a "Macro Sequence."
Defining Single Keys
To define a single key response for an input, first ensure that the
"Single Key" option is selected for the input (this is the default
value). Then click on the response definition box (initially labeled
"Not Used"). This will open a window displaying a selection of
keystrokes, mouse buttons, and joystick functions. At the top of
this dialog appear three tabs used to select between the type of
response for that particular input.
Keyboard Tab:
The "Keyboard" tab is the default and when it is selected, a
diagram of a standard keyboard is displayed as shown below.
Clicking on the representation of a key will assign that key to the
input. The selected key will now appear in the response definition
box for the input number you have chosen.
10
Advertisement
Table of Contents
